Jump to content

Clock setting


Recommended Posts

Don't know if this is something related to the 13B07 update, but since my clock loses the time. Once it was off by almost an hour and then suddenly reset to the correct time. Then yesterday, it wouldn't adjust, being about 20 minutes slow. It is properly paired with my iPhone. Does the clock get it's time from the phone or from the gps (no gps module in my car)? I manually set the time last night and it seems to be accurate now. Any ideas anyone?

 

Marty

 

Link to comment
Share on other sites

I had three updates done this week - the MFT/Sync 3.5.1, the one-kick liftgate and the PCM.  I notice the clock was about 5 minutes slow.  I went into clock settings and pushed sync w GPS.  The clock then changed to one hour slow (i.e., didn't account for daylight savings time).  I advanced the clock one hour to get the correct time.

 

I tried to sync the clock w GPS the next day and again it was one hour slow.

 

I may be confused, but I thought there was a daylight savings time on/off button before I got the updates.  I can't find a daylight savings time on/off button now.  Am I missing something?

Link to comment
Share on other sites

I may be confused, but I thought there was a daylight savings time on/off button before I got the updates.  I can't find a daylight savings time on/off button now.  Am I missing something?

 

That DST feature went away with 3.5.1.  Now, you have to update it with GPS, then manually change it by an hour, to get a good time hack (or do it all manually of course)..

Link to comment
Share on other sites

My clock was spot on for the first month or so, and then I saw that it was running about a minute behind (given that my cell phone and the radio broadcast agreed with the current time, and MFT showed about a minute behind).  My last car had a clock that would slowly get behind, and I would have to fix it every couple of months.  Not a big deal, but a nag that I hope will not be the case on my C-MAX.

Link to comment
Share on other sites

  • 2 years later...

From OASIS today:

 

2014-2015 Escape/2013-2016 C-MAX/2014 Focus And 2015 Focus Vehicles - Built On Or Before 1/26/2015 - Unable To Set Clock

 

Some 2014-2015 Escape, 2013-2016 C-MAX, 2014 Focus and 2015 Focus vehicles built on or before 1/26/2015 equipped with a Front Control Display Interface Module (FCDIM) may exhibit a concern where the time on the clock display cannot be adjusted. To adjust the clock display, first set the date in the FCDIM which will then allow the clock display to be set.

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...