Jump to content

TSB 13-6-28 Intelligent Access Remote Start feature Equipped Vehicles built before 4/2/2013


Bill-N
 Share

Recommended Posts

FORD:
2013 C-MAX, Focus, Escape

 

This article supersedes TSB 13-2-5 to add a production fix date.

ISSUE:

Some 2013 Escape 1.6L Gasoline Turbocharged Direct Injection (GTDI)/2.0L GTDI, 2013 Focus 2.0L Gasoline Direct Injection (GDI) and C-MAX vehicles equipped with Intelligent Access Remote Start feature and built on or before 4/1/2013 exhibit diagnostic trouble codes (DTCs) P025A/U0109 (Escape), P025A/U0109/P0103 (Focus) and P025A/P0103/P1A0C (C-MAX) stored in the Powertrain Control Module memory. When using the Remote Start feature, customers may experience a Crank No-Start or Stall shortly after vehicle is driven. All DTC s (P025A/U0109 for Escape, P025A/U0109/P0103 for Focus and P025A/P0103/P1A0C for C-MAX) must be present for this TSB to apply.

ACTION:

Reprogram the body control module (BCM) to the latest calibration using IDS release 83.02 or higher. Calibration files may also be obtained at www.motorcraft.com.

 

WARRANTY STATUS:

Eligible Under Provisions Of New Vehicle Limited Warranty Coverage And Emissions Warranty Coverage

IMPORTANT: Warranty/ESP coverage limits/policies/prior approvals are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool.

 

 

 

 

Note: Topic Title edited by poster.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...