Bill-N Posted February 5, 2015 Report Share Posted February 5, 2015 (edited) SSM 44776 - 2013-2014 C-Max, 2013-2015 Fusion HEV/PHEV and MKZ HEV, or 2012-2014 Focus BEV - Powertrain Modules Coordinated Flash - Service Tip2013-2014 C-Max, 2013-2015 Fusion HEV/PHEV and MKZ HEV, and 2012-2014 Focus BEV require a coordinated flash when performing module programming for the ABS, BECM, PCM, SOBDM, or TCM. When module programming is initiated for any of these modules, the IDS will check for software updates for the ABS, BECM, PCM, SOBDM, and the TCM and will automatically install updates to each module that is not already at the latest level. If the coordinated flash is interrupted undesired vehicle operation may result. If the ABS module is programmed during the coordinated flash, DTC C1018 may be present after programming has completed, and the Multi-Calibration Routine must be performed. The Multi-Calibration Routine is found in IDS by selecting Toolbox - Chassis - Braking – Service Routine – Multi-Calibration.Posters Note: This rather implies that it is possible to have an incomplete or partial software update. Edited February 5, 2015 by Bill-N Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.