Jump to content

Oil Change Monitor reset


Recommended Posts

Resetting the Oil Life Monitoring System

Note: Reset the oil life monitoring only after an oil change.

1. Turn the ignition key to the on position. Do not start the engine.

For vehicles with push-button start, press and hold the start button for

two seconds without pressing the brake pedal. Do not attempt to start

the engine.

2. Press both the accelerator and brake pedals at the same time.

3. Keep both pedals fully pressed.

4. After three seconds, the Service: Oil reset in prog. message will be

displayed.

5. After 25 seconds, the Service: Oil reset complete message will be

displayed.

6. Release both the accelerator and brake pedals.

7. The Service: Oil reset complete message will no longer be

displayed.

8. Rotate the key to the off position.

For vehicles with push-button start, press the start button to turn the

vehicle off completely.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...