dyee

Old post but Bluetooth might not work with iPhone, might need MX wifi. https://www.forscan.org/forum/viewtopic.php?f=4&t=5227

Petcock is located in the front left corner. You need to take off the felt like cover and the plastic cover near the bumper. The electronic coolant spring clip was also hard to access. You drain by disconnecting the hose from the pump.

Looks like a messed up petcock, seal broke taking it out.

I located the coolant drain petcock, but can only turn it 90 degrees. Not much space to get tools tools in there, I used a 19mm socket to turn it. Any tips on how to open the valve?

For my phone I use a magnetic phone mount that goes in the CD slot.

Could it be the courtesy rear wipe? If your front wiper is on and you shift to reverse the rear wipe swipes once.

I installed these vent visors on my 2014 Engeri and so far I have NOT bounced back when going up. The rear visors make a lot of noise at high speed 75-80 mph when the window is completely down, standard noise if partially open. My windows do bump the visor when going up as I see them move slightly, hopefully additional bedding time will fix this as temperatures are low. If you follow the instructions the front and back vent visor installs outside of the window channel at the B pillar. They should be inserted between the B pillar and rubber moulding.