Jump to content

When Wipers on / Headlights on?


Recommended Posts

Page 90 of the 2013 C-MAX Owners Manual Third Printing pdf file

 

Wipers and Washers AUTOWIPERS (IF EQUIPPED)

Note: Fully defrost the windshield before switching on the windshield wipers.

Note: Make sure the windshield wipers are switched off before entering a car wash.

Note: Replace the wiper blades as soon as they begin to leave bands of water or smears on the windshield.

 

Note: If autolamps have been switched on in conjunction with autowipers, low beam headlamps will illuminate automatically when the rain sensor activates the windshield wipers continuously. 

 

So I guess you need to enable AutoLamps = Set the headlight switch all the way clockwise 

Edited by kostby
Link to comment
Share on other sites

 

Page 90 of the 2013 C-MAX Owners Manual Third Printing pdf file

 

Wipers and Washers AUTOWIPERS (IF EQUIPPED)

Note: Fully defrost the windshield before switching on the windshield wipers.

Note: Make sure the windshield wipers are switched off before entering a car wash.

Note: Replace the wiper blades as soon as they begin to leave bands of water or smears on the windshield.

 

Note: If autolamps have been switched on in conjunction with autowipers, low beam headlamps will illuminate automatically when the rain sensor activates the windshield wipers continuously. 

 

So I guess you need to enable AutoLamps = Set the headlight switch all the way clockwise 

 

 

The key word in the owner’s manual is “continuously. “

Here’s a thread from Oct. See post #8.

http://fordcmaxhybridforum.com/topic/3083-headlights-auto-onauto-light-rain/?hl=wipers

 

 

Link to comment
Share on other sites

 

Page 90 of the 2013 C-MAX Owners Manual Third Printing pdf file

 

Wipers and Washers AUTOWIPERS (IF EQUIPPED)

Note: Fully defrost the windshield before switching on the windshield wipers.

Note: Make sure the windshield wipers are switched off before entering a car wash.

Note: Replace the wiper blades as soon as they begin to leave bands of water or smears on the windshield.

 

Note: If autolamps have been switched on in conjunction with autowipers, low beam headlamps will illuminate automatically when the rain sensor activates the windshield wipers continuously. 

 

So I guess you need to enable AutoLamps = Set the headlight switch all the way clockwise 

 

That is where I keep mine all the time, except for when Maxus goes to the dealer.  Everytime I get it back they have turned off the auto headlights and when it gets dark oncoming cars flash me to tell me to turn on my headlights.  I just wish for once they would return it to the auto setting.  Don't know why they have to mess with it?

Link to comment
Share on other sites

  • 2 years later...

 

The key word in the owner’s manual is “continuously. “

Here’s a thread from Oct. See post #8.

http://fordcmaxhybridforum.com/topic/3083-headlights-auto-onauto-light-rain/?hl=wipers

 

 

It was raining today, my wipers were on continuously, and the headlights weren't on. In fact, it surprised me they weren't on because it was fairly dark with the rain and heavy cloud cover. Later, I was going through the options on the left hand screen and under "Setting," -> "Vehicle" -> "Lighting" I noticed an entry marked "Auto Light Rain" that has an On/Off choice (2013 owner's manual, Third Edition, p. 125). I noticed mine was set to "Off," so I turned it on. I'll have to test it next time I'm out but I suspect this is the switch that determines if your lights turn on when the wipers are constantly on. 

 

I also seem to recall my lights previously turned on automatically in the rain, so I suspect that this defaults to off -- and mine was reset to the default when I had one of the recalls done on my C-Max.

Edited by raadsel
Link to comment
Share on other sites

It was raining today, my wipers were on continuously, and the headlights weren't on. In fact, it surprised me they weren't on because it was fairly dark with the rain and heavy cloud cover. Later, I was going through the options on the left hand screen and under "Setting," -> "Vehicle" -> "Lighting" I noticed an entry marked "Auto Light Rain" that has an On/Off choice (2013 owner's manual, Third Edition, p. 125). I noticed mine was set to "Off," so I turned it on. I'll have to test it next time I'm out but I suspect this is the switch that determines if your lights turn on when the wipers are constantly on. 

 

I also seem to recall my lights previously turned on automatically in the rain, so I suspect that this defaults to off -- and mine was reset to the default when I had one of the recalls done on my C-Max.

Mine is set to ON, but it doesn't work.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...