When applying brakes it's like there is a dead zone for a brief time, but then the brakes hit HARSHLY.
This isn't about skidding, it's a very small but harsh hit. It makes the ride very Jerky.
It is impossible to creep up to anything, forward or backwards.
It's either rolling or hits just hard enough to stop the car.
This goes away if I set the parking brake on to one click, then it will creep.
If I apply parking brake harder of course, then I can creep using throttle.
It almost feels like there is lash in the drive system???
It still happens at speed and is felt as a blank moment then a harsh initial braking.
It doesn't bark the tires, or even close to it.
I don't think it's broken engine mounts, but it feels a lot like that slop or lag.
There seems to be a surprising amount of lash in the transmission.
When on a lift I can rotate the front wheel, either side or both, a surprisingly large angle in absolutely free rotation.
This is NOT CV joints. I've painted marks on the shafts as they enter the transaxle case, allowing me to see the CV joints play. There is virtually zero lash in the CV shafts. They each rotate as a properly tight unit.
Is there any adjustment in the transaxle and Regenerative Braking system?
Thanks !