Jump to content

ountersee

Hybrid Member
  • Posts

    4
  • Joined

  • Last visited

  1. I do not know if this will help anyone... while i had a few moments i opened Forscan and had asked for a self test on the APIM and it came back with "no errors" but I did notice that the touch screen via the PID readouts kept cycling between present vs not present (mostly present with a split second saying not present)... thanks again in advance
  2. @cr08, I did have to update the car via Ford's update and then found out Cynlabs, which I am now running Sync 3.4.23188 via 8" touch. What is weird is back when it was just the Ford's update and after the very cold snap (live in the midwest) is when the screen started to "blink", meaning that if key was on the screen was on and did not have any issues. One day near Christmas time I washed my car to clean the salt and grime off then the screen started to blink (I believe coincidental not cause). Headlamp position does not matter... My "blink" is a bit on the slower side, Bright for about 2 seconds, then Dim for about 2 seconds then "off" for about 4/5 seconds. I believe that the issue is with the "TV"/ screen because if I use the touchsreen it does work regardless what part of the "blink" it is in, and the "radio" has no trouble playing any sound.
  3. Thanks Greg, but I have done a master reset with no avail either… I am thinking it may be the “tv” screen.
  4. Hello I have purchased a 17 c-max hybrid se (used but new to me)... when I got the car the screen was fine but now the screen "blinks" (bright-dim-off), everything works except the "blinking"... I have already tried to pull the fuse/ skip forward & power "reset" but still no avail... called local Ford dealership but no help because better to have tech figure it out... I do have Forscan "extended"... I am trying to figure out what "part" is the cause and if I can fix it... Thanks in advance
×
×
  • Create New...