Jump to content

Tinted Windows


Recommended Posts

  • 2 weeks later...

In doing some research for the C-MAX, I ran across this excellent resource for window tinting, including laws by state: http://www.tintcenter.com/. One thing I wasn't aware of was that there were regulations for both the darkness of the tint, and the reflectivity.


Darkness of tint is measured by Visible Light Transmission percentage (VLT%) - the percentage of visible light allowed in through the film only. Where I live in Washington the regulation for passenger cars appears to be: must allow more than 24% for all windows (not including the windshield).

 

Reflectivity: Separate from darkness, the law regulates how reflective the tint can be. Some tinting film contain metallic elements that help in reflecting incoming light and reducing the glare and heat generated by visible light. In Washington the regulation for reflectivity in passenger cars appears to be: must be less than 35% for all windows (not including the windshield).

Link to comment
Share on other sites

I have been doing some research on this on the internet and basically what I have found is that the local state police can ticket you according to their states laws. The general consensus from what I have read is that if you don't get an attitude with the police officer they generally won't worry about the tinting. If you google "out of state window tint violation" there are a lot of links to forums and such where people have voiced their opinions and occasionally there is a police officer that voices in on them also. Below is the link to tintcenter.com's blog post about the issue.

 

I am in the military and travel all over the US and am still planning on getting my windows tinted. I have looked at quite a few of the state laws and I think I am going to put 35% on all of the windows behind the driver and 50% on the driver and passenger front windows. I currently live in VA and front windows can't be more than 50% here. I figured that 35% is dark enough to block enough of the light and still meets most states requirements. If I happen to end up somewhere that has more stringent tint laws, I will change it according to their laws just to be on the safe side.

 

 

http://www.tintcenter.com/blog/2012/02/out-of-state-window-tint-violation/

Link to comment
Share on other sites

I would guess that the rules that apply to the state where the car is licensed would be in force. If I were pulled over in another state with more restrictive laws - and if the officer wanted to cite me for window tint, I imagine that I would reference the law for the state listed on the license plate. If necessary, I would pull up the page using my cell phone. But I'm not a lawyer.  

 

EDIT:  I take this all back. Nod to CMAX (thanks for the blog reference): http://www.tintcenter.com/blog/2012/02/out-of-state-window-tint-violation/

 

Not only do I take this all back, but it may inform the level of tinting I get for my new car. As a WA resident, I was thinking of something in the 25% range (which would be in compliance in WA). As I read about this more, I'm now thinking about 35% transmit. I have not decided yet.

Edited by Riddley
Link to comment
Share on other sites

I would guess that the rules that apply to the state where the car is licensed would be in force. If I were pulled over in another state with more restrictive laws - and if the officer wanted to cite me for window tint, I imagine that I would reference the law for the state listed on the license plate. If necessary, I would pull up the page using my cell phone. But I'm not a lawyer.  

That's not how it works.  Every state has the right to enforce their own laws.

Link to comment
Share on other sites

I've driven to California many, many times in my various Arizona heavy tinted cars and have never been ticketed.  I would recommend not worrying about that issue, and get whatever your state allows or less and enjoy it.  We're at 35% front, 5% back, and like it very much.

Yeah, I mainly meant it as tounge-in-cheek.

Link to comment
Share on other sites

That's not how it works.  Every state has the right to enforce their own laws.

Your both right.  Zhackwyatt is right in that each state does have the right to enforce their own laws.  However Riddley is also right in that Officers use the state the car came from as a general guide on whether or not to cite for tint in their respective State.  For example Arizona doesn't have tinting laws so generally speaking an office would not cite an Arizona vehicle in CA for tint.  However Colorado does have tint laws so a Colorado vehicle in CA might get cited for having limo tint on its side windows.  Of course they would be cited for the CA tint vehicle code section and not the Colorado VC section.

Edited by dtorres
Link to comment
Share on other sites

Being new here, I haven't figured how to attach Pics yet.  Anyway, I picked up my C-Max from the dealer yesterday with all my windows tinted, including the Sun Strip and the two port holes.

 

Front - 50%

Back and roof - 35%

 

 I am now waiting the 48 hrs, so I can use my windows. I am really happy with the job they did.

Link to comment
Share on other sites

Steps to Insert an image file to your post (as opposed to attaching). You use "insert" when the image file exists on the Internet already.  Example: if you have an image already uploaded to the C-MAX Forum Gallery.

 

I have inserted a sample image file to this post to illustrate what these steps accomplish.

  1. The picture needs to be somewhere on the internet already. Many people use a file sharing service for this. Alternately, you can insert an image that you previously uploaded to the C-MAX Forum Gallery.
  2. Locate the image you want to show.
  3. Identify (copy) the URL of that image: In the case of the image below, I just right-clicked on the image on the other webpage and selected "Properties". Then I copied the path that is shown for where the image resides.. Note, you can try this yourself. Right click on the image of the red car below, then select Properties, then you will see the path. Copy that path.
  4. Now, when you are composing a new post, to insert a picture, click on the [image] button on the editing toolbar. You will see a prompt for the URL.
  5. Paste in the URL that you copied in step 3 above and click [OK].
  6. Click on the [Preview Post] button at the bottom of the screen. 
  7. Review the preview of your post, make any final changes/edits.
  8. Click on the [Add Post/Reply] to publish your post.

Note: The image you want to insert must be a conventional image file ending in .jpg, .jpeg, .png, etc. 

 

If you follow these steps, it should result in the image appearing in your post (example below).   

 

gallery_799_59_7662.jpg

 

Hope this helps. Note: you can test this by using the "Test" forum at the bottom of the list of forums in the main page of this site. :)

Edited by Riddley
Link to comment
Share on other sites

Steps to Attach an image file to your post (as opposed to inserting). You can use these steps to include a file that is on your computer (not yet on the Internet).

 

I have attached a sample file to this post to illustrate what these steps accomplish.  

  1. In the editor, click on the [More Reply Options] at the bottom of the screen. This opens the "full editor"
  2. Notice that at the bottom of this full editor, you have the [Attach Files] control.
  3. Click on the [Browse] button.  
  4. Locate and double-click on the file you want to attach.
  5. Click on the [Attach This File] button
  6. At this point you have one file uploaded to the site, and ready to attach to your post A thumbnail will appear below the post you are editing. You can choose to add another file, or if you are satisfied, you can move onto the next step.
  7. Place the cursor in the exact location in your message where you want the image or attachment to appear.
  8. Click on the [Add to Post] button to add the file to your post as an attachment.
  9. Click on the [Preview Post] button at the bottom of the screen. 
  10. Review the preview of your post, make any final changes/edits.
  11. Click on the [Add Post/Reply] to publish your post.

post-799-0-28627300-1365705381_thumb.png


    Note: you can upload up to 67.58K of files (Max. single file size: 67.58K)

 

Hope this helps. Note: you can test this by using the "Test" forum at the bottom of the list of forums in the main page of this site.  :)

Edited by Riddley
Link to comment
Share on other sites

I dropped my Ruby Red off this morning to get 5% ultra-dark from the rear passenger windows back to the hatch and state legal for front doors (35% IIRC).   I wouldn't have gone 5% without a rear view camera due to vision restrictions at night while backing up.    Combining that with a new windshield shade will have me prepared for the impending onslaught of summer heat! :sad:  Pics coming after I pick it up.  :camera:

Link to comment
Share on other sites

  • 2 weeks later...

I dropped my Ruby Red off this morning to get 5% ultra-dark from the rear passenger windows back to the hatch and state legal for front doors (35% IIRC).   I wouldn't have gone 5% without a rear view camera due to vision restrictions at night while backing up.    Combining that with a new windshield shade will have me prepared for the impending onslaught of summer heat! :sad:  Pics coming after I pick it up.  :camera:

 

This is an evening shot without any back light so the tint appears to be even much darker than it is.  Fronts are Texas legal.  I wouldn't get the rears that dark if I didn't have a backup camera.  

 

9BD55500-3F5D-4BA9-920F-39C745948EAE-202

Link to comment
Share on other sites

  • 2 weeks later...
  • 4 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...