Jus-A-CMax Posted June 1, 2014 Report Share Posted June 1, 2014 (edited) So today, I finally got my MFT to screw up by itself - it decided to turn the "Audio Off" by itself. As well, no SYNC through the paddle either and I was so enjoying my techno audio at the time. Even multiple cold restarts did NOTHING. It took a Master Reset and an extended cold start to "reboot" the MFT. TO be fair, MFT has been pretty stable since mid 2013. Seriously, no issue whatsoever until it puked today. *sigh* I really hated Microsoft at that moment. Edited June 1, 2014 by Jus-A-CMax Quote Link to comment Share on other sites More sharing options...
weebee Posted June 1, 2014 Report Share Posted June 1, 2014 I had a few issues with MFT on the 2011 Edge I had. I would have thought that by now they would have had the bugs worked out. What version number do you have? Quote Link to comment Share on other sites More sharing options...
ScubaDadMiami Posted June 1, 2014 Report Share Posted June 1, 2014 Just when you have full confidence, . . . . :doh: :cry: Quote Link to comment Share on other sites More sharing options...
zhackwyatt Posted June 2, 2014 Report Share Posted June 2, 2014 So today, I finally got my MFT to screw up by itself - it decided to turn the "Audio Off" by itself. As well, no SYNC through the paddle either and I was so enjoying my techno audio at the time. Even multiple cold restarts did NOTHING. It took a Master Reset and an extended cold start to "reboot" the MFT. TO be fair, MFT has been pretty stable since mid 2013. Seriously, no issue whatsoever until it puked today. *sigh* I really hated Microsoft at that moment.I haven't had any problems since the last update. I thought I read that Ford claimed responsiblity for MFT and Microsoft wasn't really at fault? Quote Link to comment Share on other sites More sharing options...
Jus-A-CMax Posted June 2, 2014 Author Report Share Posted June 2, 2014 (edited) @weebee 3.6.2 I checked the syncmyride and theres no more updates to my MFT at present. @sdm. *sigh* exactly :drop: @zhackwyatt could be but all I saw was the Microsoft logo and went ballistic in my mind. However, a few deep breaths, I calmed down and thought, I had a good run. Crap happens. It's back to normal, well almost, it seems to take forever to "index" and "build command". I use my thumb drive a lot with playlists et al. Abd radio too. Given up on Sirius, waste of money. Edited June 2, 2014 by Jus-A-CMax Quote Link to comment Share on other sites More sharing options...
wamba2000 Posted June 2, 2014 Report Share Posted June 2, 2014 Jus, sorry to hear of the issue. My MFT/Sync had some learning issues, after having sat mostly unused for 4+ months. Kept re-indexing USB, not responding to voice commands as it formerly did. I think I am back to more normal now. I did read that Ford was dumping their Windows CE based systems with a move toward a Blackberry based system. Not sure if that is a good long term choice, but the interface may still be around for a while?http://www.bloomberg.com/news/2014-02-22/ford-said-to-swap-blackberry-s-qnx-for-microsoft-in-sync-system.html Quote Link to comment Share on other sites More sharing options...
ceemax71 Posted June 2, 2014 Report Share Posted June 2, 2014 @weebee 3.6.2 I checked the syncmyride and theres no more updates to my MFT at present. From a post from Bill-N, there is an updated dealer-install-only update that came out last week.It is supposed to address frozen radios. May 29 2014 4984 -2013-2014 C-MAX - Frozen Or Delayed Update Of Radio Station DisplaySome 2013-2014 C-MAX vehicles may exhibit an intermittent concern while changing radio stations. The station changes but the screen display does not reflect the station change. The screen may eventually display the correct frequency or channel after a few minute delay. This may occur on FM, AM bands and/or Sirius channels. To correct the condition reprogram the Audio Control Module (ACM) to the latest calibration using IDS release 90.04 and higher. Calibration files may also be obtained at www.motorcraft.com. For warranty claiming use causal part 19C107, and use the applicable 12651D labor operations in Section 10 of the SLTS Manual for the vehicle. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.