CNCGeek Posted November 11, 2012 Report Share Posted November 11, 2012 I had been flashed by drivers a couple times in the past couple days. Initially I thought it was due to the angle of the road I was on, but last night I was on a level road and somebody flashed me so I knew my lights were not adjusted properly. I went through the adjustment proceedure in the manual pg 298 and set the height for (B) in the diagram to 31" and found that my lights had to go down over a turn on the adjustment screw, both were pointed too high. The adjustment is simple and nothing needs to be removed (just open the hood), but only the vertical alignment is adjustable - it is the yellow plastic cup on top of the headlamps that accepts a phillips screwdriver. I could have asked the dealer to do this, but I am pretty fed up with them. Quote Link to comment Share on other sites More sharing options...
AMSDPS Posted November 14, 2012 Report Share Posted November 14, 2012 Good to know!! Thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.