Annabug Posted January 26, 2016 Report Share Posted January 26, 2016 After the snowstorm here in NJ, my speakers crackeled and popped. Then one big POP. Now I can't turnln the radio, Sync, etc. I press the knob to power the audio system on and the screen flashes,then disappears as if being turned off. Screen still displays time, date ,temperature. But otherwise, nothing will display or work. I called the dealership and somehow even with my extended warranty, its out of warranty. I did see the thread about pulling fuses and will try that. I wondering of others have had this issue and what the remedy was and approximate cost. Oh and this is a 2013 cmax hybrid. Thanks! Quote Link to comment Share on other sites More sharing options...
obob Posted January 26, 2016 Report Share Posted January 26, 2016 I am curious, What level extended warranty did you get ? Does that also mean the heater won't work ? Quote Link to comment Share on other sites More sharing options...
plus 3 golfer Posted January 26, 2016 Report Share Posted January 26, 2016 After the snowstorm here in NJ, my speakers crackeled and popped. Then one big POP. Now I can't turnln the radio, Sync, etc. I press the knob to power the audio system on and the screen flashes,then disappears as if being turned off. Screen still displays time, date ,temperature. But otherwise, nothing will display or work. I called the dealership and somehow even with my extended warranty, its out of warranty. I did see the thread about pulling fuses and will try that. I wondering of others have had this issue and what the remedy was and approximate cost. Oh and this is a 2013 cmax hybrid. Thanks!Also, make sure the fuses are good by checking the continuity of the fuse with a voltmeter. Use Ohm setting with leads across the fuse. If good, you should see near zero. I'd check F67 and F79 (see link below). obob 1 Quote Link to comment Share on other sites More sharing options...
SnowStorm Posted March 2, 2018 Report Share Posted March 2, 2018 Also, make sure the fuses are good by checking the continuity of the fuse with a voltmeter. Use Ohm setting with leads across the fuse. If good, you should see near zero. I'd check F67 and F79 (see link below). BCM Fuse Layout.PNGMy radio has died - similar symptoms to Annabug. For a while there would be a loud pop/blast of noise after which the sound system wouldn't work until turning car off/on again. Sometimes it would turn on but no sound and few functions would work. Now its just dead all the time. When you press the knob it alternates between a brief flash on the screen and no response at all. Pulled F67 and 79 and checked them but it didn't help. Does anyone know where the fault might be? Quote Link to comment Share on other sites More sharing options...
syd2aussie Posted March 3, 2018 Report Share Posted March 3, 2018 I just fixed this myself. I pulled both fuses, started the car, let it run for 5 minutes (not necessary to have the ICE running), put the fuses back in and everything worked. I didn't notice if you had run the car after pulling the fuses. That seems to make a difference. djc 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.