fleetwood95 Posted March 3, 2018 Report Share Posted March 3, 2018 Hello all, this is my first post on this forum! I just finished some work on my car (1995 Cadillac Fleetwood) and I figured I should investigate a whirring noise on my wife's 2013 C Max Hybrid. When I was working on my rotors and repacking the bearings on my Cadillac it got me interested to research the strange noise I have heard coming from my wife's back passenger tire. I read over another thread in this forum discussing tires and alignment as a possible cause of the problem. The noise has been going on for a fairly long time, and it seems to get louder as speed increases. New tires were just installed and I believe a small balance and adjustment was done when they were installed. My concern is that the bearing may be going bad, and I don't want it to lock up on us and cause damage to the car or my wife! From my research, it looks like the car has a different type of bearing than my Cadillac (2 small bearings that you can pack by hand); It looks like a whole assembled unit that you have to take in and out while disconnect an ABS sensor (at least on the Ford Escape/Focus videos I watched). The part from Autozone that I checked out looked like ~$200 apiece!!! :spend: I am sorry for my rambling, just trying to get all the details and things I have done/watched so far. TLDR: Basic whirring noise in the back right tire region, seems to get louder with speed and lessen intensity when the gas is released regardless of speed. We are going on a ~700 trip this coming weekend and I don't want to get stranded if something blows out on the car, so we may have to take the Caddy! Please help! Thank you so much. Quote Link to comment Share on other sites More sharing options...
obob Posted March 3, 2018 Report Share Posted March 3, 2018 (edited) UPDATE: Sorry. I didn't read the post well. I didn't realize you put new tires on so my "cupping" reaction was wrong. Links about cupping on C-Max. https://www.google.com/search?q=fordcmaxhybridforum.com+cupping&oq=fordcmaxhybridforum.com+cupping&aqs=chrome..69i57.21506j0j4&sourceid=chrome&ie=UTF-8 Edited March 4, 2018 by obob Quote Link to comment Share on other sites More sharing options...
SnowStorm Posted March 3, 2018 Report Share Posted March 3, 2018 So, the noise has continued the same after getting new tires? How many miles on the car? Quote Link to comment Share on other sites More sharing options...
fleetwood95 Posted March 4, 2018 Author Report Share Posted March 4, 2018 Yes the noise has continued since then. I can't say whether it's better or worse though. The car has approximately 77K miles on it. I don't think it's ever had a full re balancing though. Just minor tweaks. The car was bought used by her father in 2013 I believe. Quote Link to comment Share on other sites More sharing options...
ptjones Posted March 4, 2018 Report Share Posted March 4, 2018 It could be wheel bearing, I had a rear wheel bearing replaced when mine was pretty new. I suspect car haulers tighten cars down to tight and damage bearings. :sad: Paul obob 1 Quote Link to comment Share on other sites More sharing options...
fleetwood95 Posted March 4, 2018 Author Report Share Posted March 4, 2018 Paul, I have watched some videos on how to tell if a bearing is bad. Jack the car up and wiggle the tire around a bit. If it moves around when pushed, the bearing may be bad? The bearings on these cars seem like they're a whole assembly and hub. It's different than my Cadillac which just uses small bearings inside the rotors itself. Is this correct? How much is a replacement part? I don't want to go willy nilly replacing stuff, but it seems like whirring noises generally are bearings. Thank you. :worship: obob 1 Quote Link to comment Share on other sites More sharing options...
ptjones Posted March 5, 2018 Report Share Posted March 5, 2018 Paul, I have watched some videos on how to tell if a bearing is bad. Jack the car up and wiggle the tire around a bit. If it moves around when pushed, the bearing may be bad? The bearings on these cars seem like they're a whole assembly and hub. It's different than my Cadillac which just uses small bearings inside the rotors itself. Is this correct? How much is a replacement part? I don't want to go willy nilly replacing stuff, but it seems like whirring noises generally are bearings. Thank you. :worship:That's what I would do. CV6Z-1104-F or Motorcraft number HUB220 will be your part number, around $137 Good LuckPaul Quote Link to comment Share on other sites More sharing options...
fleetwood95 Posted March 5, 2018 Author Report Share Posted March 5, 2018 Great thanks, I'll try that! If it moves around and has lots of play, we can assume it's the bearing? How difficult is it for one to replace this part themselves? Ouch, that's a killer. Any place you recommend buying it? Should they be replaced in pairs? We're leaving town this weekend so it will be a little time before I can check it. What else could it be besides a bearing? Thanks! Quote Link to comment Share on other sites More sharing options...
ptjones Posted March 6, 2018 Report Share Posted March 6, 2018 They only replaced one on my CMAX, go jack up the car and see what happens. It doesn't look like a tough job. Check eBay and other Auto Parts stores. Paul Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.