Jump to content

Transmission fluid disappears over time?


Taiwwa
 Share

Recommended Posts

Car has 130k miles.

 

Car was making loud noises so I changed transmission fluid. In videos it had made it seem like 5 point something liters were needed. I ended up putting in six liters. Drove it some more.

 

Still noisy. Not all gears, but certain ratios especially low speeds going up hill were very noisy.

 

So the other day I opened it up again and put in another liter.

 

Now it works much better. It may still need some more because I can hear a bit of noise at certain ratios so I’ll put some more in ends oil change.

 

But initially I only put in six liters because that was what the videos I saw advised, and because that was what I roughly measured in removing the used fluid. In fact, I thought I may have slightly overfilled it at the time.

 

So what gives? Could the transmission fluid have been vaporized over that time? I thought it was a self contained system.

 

I think that it is a good idea to change the fluid at 100k miles, not 150k or 250k.

Link to comment
Share on other sites

Transmission fluid doesn't "vaporize".  My guess is you are hearing the infamous "thumping" TSB sounds associated with bad bearings on the transfer shaft.  The transfer shaft will ultimately bore a hole in the transmission case and thus fluid can leak from the engine side of the transmission case into the damper housing case and eventually onto the belly cover.  See the latest "thumping" TSB. https://static.nhtsa.gov/odi/tsbs/2018/MC-10148717-9999.pdf

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...