Tools (hammer not shown)

All the tools I used for the installation, except for the hammer (used to drive the punch):

pencil

masking tape

measuring tape (I used two- a soft flexible one that's good for measuring along the roof, and a metal retractable one)

small flat bladed screwdriver (for removing and flipping various screw covers)

T15 torx driver (all the accessories that have to be removed for the headliner drop are T15)

touch up paint

hammer

center punch (to set drill hole locations)

electric drill

1/8" drill bit (pilot holes)

1/4" drill bit (intermediate size)

25/64" drill bit (final size, specified by yakima)

deburring tool (I used a lathe tool)

drill stops (made from PVC pipe - extra pipe and cutter shown)

flexible video inspection scope (useful, not required)