Smangerer

I am happy to report we have finally solved my creaking issue! It ended up being a poor pinch weld on the driver side wheel well area. The dealer finally got the right guy on the job. They reenforced the weld three times over and I haven't had that annoying creak since. I'm so glad I kept at it. I finally have my new car!

$4.09 20 miles out of SF and in the city... about $4.50. I went to costco today and got $3.99. I win?

.

I think I give up. I had the strut and strut plate replaced on the side that makes the sound as well as 3 other parts which I cant recall at the moment and its still there. This has been 4 trips now 2 of which have put me in a rental for a total of 9 days not including the 2 other days they had the car with out a rental. I really would like this to be fixed but I cant justify any more time for attempts to fix this annoying sound. It could be the deciding factor in weather or not I buy the car at lease end. Do I want to live with this?

I believe that that is a maximum-minimum setting. The brightest will always be brightest in full sun. But the dimmest, when the sun is gone, will be determined by that setting. To see your setting effect while setting it you will need to either cover the sensor or do it at night.

I have a 5s and have purchased the exact setup you mention. I did it for a couple nights of Netflix and it works fine. However, there is a mess of "cablage" which would get annoying fast if you wanted it "perma-instaled". I took a look at Waze which worked, but usability fell to zero as you cannot use the cars screen for input to your devise, or for anything else. One thing to note when sending video out of phones... some apps limit how video can be displayed and will not allow it over said adapters.

well google bought waze so all of waze data is now in google maps. I find it the most accurate and has the best display. Also you can set it up to use the phone speakers for direction (which I prefer) instead the car speakers.

Use Waze!

I have had a very similar experience. They have replaced a support arm, a Damper, and I guess they have one more piece on order. Its the same noise you described. Its been there for over a year now and 3 trips/ attempts to be fixed. I have one more part on order. The first attempt they replaced a support arm then coated the damper (after pinpointing the sound there) with a rubber lube but it only worked for a week. Then they replaced the damper and now have the arm that attaches to the damper on order. Are the Strut and Strut Plate the exact parts? Im going to show them this info and want to make sure Im telling them the correct info. Thanks and I wish I would have searched this forum for this problem.

I just found another option for product. http://www.theretrofitsource.com/led-lighting/morimoto-x-drl-led-running-light-48616.html#.Ux-dT-e9S3U the "Xb Led" strips caught my eye then I saw the above "x-drl". I may try them out and If I do Ill update.

I never have luck with the traditional velcro. Try this http://www.scotchbrand.com/wps/portal/3M/en_US/ScotchBrand/Scotch/Products/Catalog/?N=5584757+4335+3294601533&rt=rud

Mine are pointed up. I wanted the white lights but I didnt want to mix up the colors considering my headlights are halogen. If the headlights were hid or led I would have gone white.

one thing I noticed when I tested these strips is that they have a slight throw up or down depending on how you hold them and they are identical. The reason I mention it is that you will instinctively want to mount them with the wires coming out of the strip to the center for minimal wire exposure. But if you do that, one side will be casting up and the other down. I have both of my strips mounted with the wires going to the right. The one on the right of the car I had to tuck the wires in between the grill and body and back toward the center to the gap. I doubt that anyone would notice if I had just mounted them but Im a lighting professional and it would have bugged me. Test your lights first and rotate them up and down to get a feel for where the beam is cast strongest.

They are not bright enough to overpower the headlights if thats what your asking. I couldn't say if they are too bright for oncoming or rear view traffic but no complaints yet and having seen some truck lightbar mods, Im on the low end of the offensive scale in comparison. I leave mine on all the time unless Im parked with accessory mode on for radio or watching netflix or when taking it in for service. The FOB module has a button dedicated to 6 brightness settings but I leave mine on high.

indeed I am in the area. I treck all over the bay for work but rarely have time to play while out. As far as your Hella lights vs. the LED strips... if your primary goal is true DRL's then you went the correct path because of the housing and lenses your lights have. They are, Im assuming, rather visible in full sunlight? I wanted that but didn't want to do any drilling so I went with the brightest strips I could (which is accomplished by having shoulder to shoulder diodes). The strips on the headlights are spaced out and since they are not recessed, they disappear in full sun. The lower grills are slightly recessed and therefore kept in shade so better but not aimed with a projector/intensifier.

I used the adhesive backing on the strips to mount them and I pulled the wire up with a coat hanger. Its hard to describe and I doubt I could get a picture but I tied a loop on the end of the wire and pushed it though a gap on either side behind the outer most grill opening. Now standing with hood open looking down, If you hold your head and a flashlight at an incredibly specific angle you can see the wire loop and with careful movements (think operation) I got it pulled up. Im sure I could have taken the car apart but screw that. I then zip tied the wires along framing over to the fuse side. I used an existing bolt on the frame with extra thread for ground and I tapped the rear wiper fuse for power. It may appear a bit loose in spots but I wanted to be able to pull it all out with ease If I desired. This (kinda) shows the gap. The bottom row of lights is a my cheap first purchase which was underwhelming. I left them in place for the hell of it. This is looking down from the pull through point. (yellow and black wires center right) This is the ground bolt I used. I added nuts to sandwich my ground in there. (black wire, center) This is the Fob module (right, with blue and green wires) and the power fuse box (left, with red wire) The module has an inline fuse for additional protection.

I ran my LED strips to the rear wiper fuse which is always on with ignition. I tossed in a FOB switch in line so I can power them off if needed. I apologies if this is redundant.

It seems clear to me that this adds a NEW rca input (three actually) which is active when in reverse (the other two can be toggled via steering wheel) and there is no need to cut or splice anything. Simple. Let me know how you opt to run the cables to the rear camera. Thanks

Curious... did you read this thread? I suggest you read this whole thread from the top.

http://fordcmaxhybridforum.com/topic/3284-aftermarket-backup-camera/

Im just curious why you would want to remove the light? I would say that the third brake light is the most important/effective at getting the attention of the person behind you as it is centered and isn't buried, if you will, by the tail lights at night.

I apologize but I left out one site, radiantz.com. Headlight strips are the "Roachez" from Radiantz. Lower grill is the denser "True Flex" on the costomdynamics site or "Z-Flex" on the radiantz site. I got the first but they appear to very similar in design and price. These have the LEDS packed in there for maximum punch. The switch is http://www.superbrightleds.com/moreinfo/installation-supplies/universal-remote-control-with-key-fobs-rgb/1533/3560/ It took me hours to initially find all these sites and products so enjoy! (PS. I realize the last two links are to the roachez link. It wont let me add new links for the diffrent products. It is the correct website however.) CustomDynamics.com Radiantz.com SuperBrightleds.com

So you got the Model 301 listed at the top? And It appears you used vehicle power after-all. You mentioned that you could use the lockpic as a power source, could that have worked or did you just get impatient? I am almost certainly going to do this.

They are mounted on the outside of the housing with 3M adhesive. The ones on the bottom are stuck on as well. I could have gotten any color I wanted. The two sites I bought from are SuperBrightLEDs.com and CustomDynamics.

I did a similar mod. I went with Amber Leds to match the non HID lighting. I used the rear wiper fuse to provide power as it is always on when the car is on. I also added a wireless FOB switch to turn them off if needed. That switch also has several strobe programs as well as a dimmer built in, not that I would ever use them.