seiko Posted June 8, 2023 Report Share Posted June 8, 2023 Im showing a number of dtc, need some help fixing it, mainly looking to fix the apim ones. I think , APIM B1215:00-2B EXTERNAL MEMORY CARD -DTC PRESENT AT TIME OF REQUEST There are no memory cards installed that i know of. APIM U2101:00-2B CONTROL MODULE CONFIGURSTION INCOMPATIBLE -DTC PRESENT AT TIME OF REQUEST Ive reset it to as built and need help configuring it. BdyCM B109B:15-6C LICENSE PLATE LIGHT -CIRCUIT SHORT TO BATTLRY OR OPEN Im guessing i need to replace this bulb BdyCM B1399:05-2F PERSONALISED KEY SYNCHRONISATION -SYSTEM PROGRAMMING FAILURE Missing master key, only have a admin restricted mykey. tried to program new keys but laptop died in while doing it. Not sure of they are compatible. Going to get oem key when i can afford it. I turned off mykey for now. IPMB B115E:08-0B CAMERA MODULE -BUS SIGNAL/MESSAGE FAILURES Had this error, camera is upside down most of the time. IPMB B115E:54-48 -MISSING CALIBRATION Reset tge ipmb with as built, now needs programming. 2013 ford cmax hydrid sel with sync2 sony/microsoft system. Big screen. I was getting errors out of the pcm but i just they arent there now. I was working on the hvac system and my engine seems like it was worked on as the engine air filter block was missing both bolts and the low pressure cap was missing. The engine air intake hose is broken, missing part of the bolt downs. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.