Moerdogg Posted November 5, 2023 Report Share Posted November 5, 2023 I was involved in a minor collision where a knucklehead hit me from behind at low speed, denting the rear hatch. It opens and closes fine but is cosmetically ugly. I was going to take it to a body shop but I found a complete hatch on eBay in the same color. It is from a 2013, mine is a 2017. The seller says it won’t fit a 2017 because “the lights are different”. A review online shows Ford changed the styling of the lights but they look to be the same shape. Can anyone confirm one way or the other? Quote Link to comment Share on other sites More sharing options...
David McC Posted November 6, 2023 Report Share Posted November 6, 2023 (edited) All the listings I see have the same hatch fitting all years of the car. The tail lights did change in 2017, but all they did was flip the white and red parts of the lens and restyle the lenses slightly. They appear to be the same shape. Here's how to take the light off the liftgate on a pre 2017, but they seem to mount the same way on every year. I doubt they changed the mounting lug locations even if the lens got restyled. Edited November 22, 2023 by David McC C-MaxA2 and homestead 2 Quote Link to comment Share on other sites More sharing options...
Moerdogg Posted November 6, 2023 Author Report Share Posted November 6, 2023 On 11/5/2023 at 11:07 PM, David McC said: All the listings I see have the same hatch fitting all years of the car. The tail lights did change in 2017, but all they did was flip the white and red parts of the lens and restyle the lenses slightly. They appear to be the same shape. Here's how to take the light off the liftgate on a pre 1917, but they seem to mount the same way on every year. I doubt they changed the mounting lug locations even if the lens got restyled. Thanks for the detailed response! Sure looks the same other than color. I’m going to go ahead and order it once I confirm my cars lights mount the same way. Swapping the lenses does indeed looks very easy. David McC 1 Quote Link to comment Share on other sites More sharing options...
Moerdogg Posted November 6, 2023 Author Report Share Posted November 6, 2023 The lens shape is not changed as far as I can tell, but the connector is changed, see below. White connector is 2013-2016, Gray is 2017+. Both look to be 3-wire (Power for each bulb plus commons ground, I assume). Figure I will splice in the existing pigtail to the new hatch. Quote Link to comment Share on other sites More sharing options...
homestead Posted November 6, 2023 Report Share Posted November 6, 2023 Moerdogg Is it possible to just move your wire harness and lights from the damaged hatch to the 2013 hatch? Or were the lights damaged in the crash? Quote Link to comment Share on other sites More sharing options...
Moerdogg Posted November 6, 2023 Author Report Share Posted November 6, 2023 On 11/6/2023 at 1:29 PM, homestead said: Moerdogg Is it possible to just move your wire harness and lights from the damaged hatch to the 2013 hatch? Or were the lights damaged in the crash? That’s my plan. Lights are fine fortunately Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.