Forscan disable double honk

[Loco Lobo]

I am new to the site and wish to find out how to disable the double honk on my 2013 Cmax SEL. I got forscan and the license and the odb2 connection but when I went in the the body module configuration the only thing I saw was TMPS choices.  Does someone have the information so I can use as built configuration?

 

Thank you

 

El Loco Lobo

[cr08]

I believe you're going to want to look into the Central Configuration specific option. That's where a lot of BCM related functions are stored. You should be seeing a LOT more there than just TPMS options. If you still only see those, check if there's a dropdown on that screen for different modes like 'engineering mode' or similar. It's been a while since I've messed with these options but in some programming areas of Forscan you have to make that change to see more stuff.

[Loco Lobo]

I tried that but still cannot get views of anything more that tpms options.  I also tried to look at the bcm on my 2013 fiesta and could only see the truck remote unlock.

 

But if I choose the as built configuration I see plenty but, I don't know the address and values to disable the double honk. Does anyone out there know which address and values I need to change to disable the double honk on my 2013 Cmax sel?

[cr08]

Unfortunately the BCM AsBuilt options are not well documented if at all for the C-Max, probably because the Central Configuration is the primary and preferred way to update these settings.

 

I'll check on my own later today after work and see if I can provide more accurate information. I also have a 2013 Energi SEL The modules are the same with the hybrid models.