Bill-N Posted January 23, 2014 Report Share Posted January 23, 2014 This from OASIS Monday: Jan 20 2014 4521 -2012-2014 Focus, 2013-2014 Escape And C-Max - DTC P1594 Some 2012-2014 Focus, 2013-2014 Escape and C-Max vehicles may exhibit DTC P1594 stored in the Body Control Module (BCM). If there is a symptom of start-stall after vehicle is remote started (within 20 sethis applies to factory or dealer installationconds) and P1594 is set in BCM with no other codes, refer to WSM, Section 414-00, PPT for BCM DTC U1007. Confirm that BMS connections and sensor are functioning properly. Replacement of the BCM without clearing other DTCs may result in a repeat repair. Monitor OASIS for updates, please continue to submit GCR REPORTS. Sorry, no indication as to whether this applies to factory and/or dealer installed remote start. hybridbear 1 Quote Link to comment Share on other sites More sharing options...
Bill-N Posted February 7, 2014 Author Report Share Posted February 7, 2014 This has been updated as follows: Feb 06 2014 4594 -2012-2014 Focus, 2013-2014 Escape And C-Max - DTC P1594 Some 2012-2014 Focus, 2013-2014 Escape and C-Max vehicles may exhibit DTC P1594 stored in the Body Control Module (BCM). If there is a symptom of start-stall after vehicle is remote started (within 20 seconds) and P1594 is set in BCM with no other codes, refer to Workshop Manual, Section 414-00, PPT for BCM DTC U1007. Confirm that BCM connections and sensor are functioning properly. Replacement of the BCM without clearing other DTCs may result in a repeat repair. The WSM, Sections 419-10 and 501-14, along with IDS Release 89.01 have updated diagnostic information and detailed snapshot descriptions. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.