ptjones Posted June 20, 2014 Report Share Posted June 20, 2014 +1 to industrial Velco. I used it for wheel covers on my snows... the front came off due to wheel flex, the rears lasted the season. In both cases, no issues with adhesive. HAve fun,FrankWhat I meant to say was the adhesive won't stick to the ICE under cover because it doesn't have a smooth surface. :) Paul Quote Link to comment Share on other sites More sharing options...
fbov Posted June 20, 2014 Report Share Posted June 20, 2014 Yeah, I used the plastic shield in front of the ICE undercover as my template; the cut-outs allow ICE access without removing the air dam. The platic's plenty smooth, but you get an arc of some sort if you want to meet up with the tire dams, which brings whatever you add forward enough to be in danger of damage. I'd also be careful about adding depth to the undercover as it's the low spot on the underbody.My dam doesn't extend that deep. Have fun,Frank ptjones 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.