Bill-N Posted February 12, 2014 Report Share Posted February 12, 2014 Although not hybrid related, I thought this worth posting for those Energi owners that may not frequent the Energi-specific forum. Moderator: please remove if deemed inappropriate. Posted today on OASIS: Feb 12 2014 4615 -Hybrid Energi - Oil Maintenance Mode Some 2013-2014 C-MAX and Fusion Energi vehicles may display "oil Maintenance" on the message center, which should not be confused with the oil change monitor. When in this mode the gas engine will run continuously and electric-only operation is not available. This feature maintains oil quality by removing fuel and water from the oil that can accumulate when the vehicle is used primarily for short trips and thus not running the engine at normal operating temperature for adequate time. To complete and exit the oil maintenance cycle, the gas engine must be operated continuously at adequate temperature to remove moisture. A drive of approximately 15 minutes is normally required, however additional drive time may be needed in very cold temperatures. Refer to the Owner Guide for additional details. obob 1 Quote Link to comment Share on other sites More sharing options...
Tdefny Posted February 12, 2014 Report Share Posted February 12, 2014 Thanks. A lot of people on the Energi forum have been experiencing this feature of late. Interestingly enough, I don't recall mention of it last year. It must be weather related. Quote Link to comment Share on other sites More sharing options...
fotomoto Posted February 13, 2014 Report Share Posted February 13, 2014 Although not hybrid related, I thought this worth posting for those Energi owners that may not frequent the Energi-specific forum. Moderator: please remove if deemed inappropriate. Thanks as always Bill for bringing this to our attention. I added it to the NRG forum. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.