Massie Lawson Posted March 13, 2014 Report Share Posted March 13, 2014 (edited) Has anyone had any issues with thier C-Max revving up right after starting it? Usually when I turn my car on, it's quiet and the engine doesn't kick on. Here lately when I start it, it's like the pedal is to the medal and the engine revvs full speed and the car starts lunging forward in park. The only way to stop it is to turn the car off and then turn it back on. Also, my battery dies a few times a month and it's a pain in my ass. If anyone can offer me any advice I would greatly appreciate it. Thanks. Edited March 13, 2014 by Massie Lawson Quote Link to comment Share on other sites More sharing options...
wab Posted March 13, 2014 Report Share Posted March 13, 2014 Greetings and Welcome Sounds like your car is VERY confused and DOES not sound like it is safe to drive.FordService (Ashley) should see this in the morning and ask you to send her a PM.You can speed up the process by going to the “Forums” tab located at the top of this page on the green tool bar. At the bottom of that pg is the “Test” sub-forum. You will need to start some new topics and/or reply to 5 topics before you can use the PM feature which is also located at the top on the same tool bar where you log in.Here’s a link to the forum “Help Topics”http://fordcmaxhybridforum.com/index.php?app=core&module=helpcheck “Personal Messenger” Hope this helps get your c-max back on the road ASAP. Quote Link to comment Share on other sites More sharing options...
salsaguy Posted March 13, 2014 Report Share Posted March 13, 2014 What year / month was your car made?Is it an SE or SEL?There have been known battery issues on many cmaxes (monthly SE models) but haven't heard about the revving issueBest of luck. Call your dealer for an appt and be safe. Quote Link to comment Share on other sites More sharing options...
FordService Posted March 13, 2014 Report Share Posted March 13, 2014 Has anyone had any issues with thier C-Max revving up right after starting it? Usually when I turn my car on, it's quiet and the engine doesn't kick on. Here lately when I start it, it's like the pedal is to the medal and the engine revvs full speed and the car starts lunging forward in park. The only way to stop it is to turn the car off and then turn it back on. Also, my battery dies a few times a month and it's a pain in my ass. If anyone can offer me any advice I would greatly appreciate it. Thanks. Massie, As wab mentioned, I'm happy to help you with this concern. Unfortunately, in order to send me a PM, you'll need to have 5 posts. You can either find four other things to post about, and then PM me your name, phone number, VIN, mileage, and dealer info, or you can give our Customer Relationship Center a call at 1-800-392-3673, and they can assist you over the phone. Ashley Quote Link to comment Share on other sites More sharing options...
ctigerdan Posted May 9, 2014 Report Share Posted May 9, 2014 This same thing happened to my car last week. I have a 2013. It was 2nd time it had happened and this time I drove directly to dealership without turning car off. It was lunging forward and eventually started smoking at which point the service manager told me we better turn it off. They had it for 2 days and fixed it (hopefully). Said it was a bad cylinder head temperature sensor..or something like that. Sensor was reporting that it was running hot and was revving to circulate coolant (at least that's how it was explained to me) and the smoke was caused by the engine compensating for the high temp by richening the fuel mixture hence the puff of smoke we saw from the oil burning. It would make more sense to me if he said the sensor was indicating cold temperature instead of hot. I hope it is fixed, but I am concerned that just a symptom was fixed, and not the cause....or do these sensors commonly go bad by themselves? I have never had battery issues although I have only had my C-max about a month. Bought a certified preowned. Hope this helps the Massie. I got on here just to see if this was common but yours was the only other post I could find. Did you take it in yet? Here is what is listed as on my invoice -Cause: Codes P0128, P128A, P1288. Performed PIN Point Test. Monitoried PIDS during test drive. Found CHT Sensor internal short.Correction: Replaced CHT Sensor and test drove vehicleParts: SPO 8S4Z6G004A Sendsor AS Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.