FreeMiles Posted September 14, 2014 Report Share Posted September 14, 2014 I was doing some research and found that the C-Max is based on the Focus platform. In my experience just about every car that shares a platform also shares suspension components i.e. Sway bars, shocks, springs, etc... Does anyone know how our factory equipped suspension compares the the Focus' performance suspension (Not the ST but the upgraded suspension package for the non-ST Focus). I'm sure that our rear springs are much stiffer then The Focus' because of our 300lb battery in the rear. But all the other components, namely the sway bars and front suspension may be much better for handling on our NRGs. (Recently posted to Energi Forum but it seems the hybrid forum is more active.)Any thoughts? Quote Link to comment Share on other sites More sharing options...
ptjones Posted September 14, 2014 Report Share Posted September 14, 2014 In previous Post's It has been said the CMAX Hybrid and Energi are Identical for suspension components. Don't know about the Focus. :) Paul Quote Link to comment Share on other sites More sharing options...
FreeMiles Posted September 14, 2014 Author Report Share Posted September 14, 2014 Interesting. I figured Ford would stiffen the 300lb heavier rear end of the Energi. Either way I'm curious to know if we could swap ours for the Focus'. Or maybe we already have the "Sportier" suspension to compensate for the added weight over the Focus. Quote Link to comment Share on other sites More sharing options...
kostby Posted September 15, 2014 Report Share Posted September 15, 2014 Ford in the UK (re)sells Eibach suspension lowering kits specifically for the gas and diesel C-MAX:http://www.ford-accessories.co.uk/GB/en/6/39/575 Quote Link to comment Share on other sites More sharing options...
FreeMiles Posted September 17, 2014 Author Report Share Posted September 17, 2014 Does anyone have any expirence lowering the US C-Max? I'm not sure sure if the UK spec lowering springs would work. And if they did, if they're the correct spring rate for the US version. Quote Link to comment Share on other sites More sharing options...
62Lincoln Posted September 18, 2014 Report Share Posted September 18, 2014 I like that you are thinking about trying this, I wish I could help with some information. Personally, I wish there were a set of premium coilovers for the Focus that would also fit the C-Max. I had a set of Ohlins on my previous car and they were the single best mod I've ever had on a car. Quote Link to comment Share on other sites More sharing options...
mike884 Posted September 22, 2014 Report Share Posted September 22, 2014 I hadn't found the car all that bad handling, and it sits pretty low as it is.... if anything the LRR tires are really holding it back. obob, ptjones and Smiling Jack 3 Quote Link to comment Share on other sites More sharing options...
HannahWCU Posted December 12, 2014 Report Share Posted December 12, 2014 I hadn't found the car all that bad handling, and it sits pretty low as it is.... if anything the LRR tires are really holding it back. I agree with this, but now having the opportunity to drive both back to back (I now own a 2014 Ford Focus Electric), The focus handles MUCH better. I think this is mostly due to the focus being lower overall and the driver sitting much lower. I can comfortably take corners at a much higher speed in the focus than in the CMax. Of course both cars could have the same cornering ability, but the higher stance in the CMax alerts my internal "oh CRAP" meter much sooner than in the focus. :shift: Smiling Jack 1 Quote Link to comment Share on other sites More sharing options...
scottwood2 Posted December 12, 2014 Report Share Posted December 12, 2014 I think the wheel wells are pretty tight to the tires so I am not sure how much you could drop it? I would love to see one dropped. Quote Link to comment Share on other sites More sharing options...
HotPotato Posted December 20, 2014 Report Share Posted December 20, 2014 Ford cars in general tend to have overly soft suspensions in front and insufficient wheel travel in back, and it has ever been thus. In the C-Max, it's the soft front that bugs--you really have to slow down for dips. Progressive springs and/or progressive shocks that really stiffen up as they approach full compression might help. Apparently Koni FSD shocks--the not-so-poor man's alternative to active suspension--are available for the C-Max in Europe. I'd love to try those, but they're probably tuned for different weight distribution--i.e. a heavy turbodiesel lump in the front and nothing much in back, instead of a relatively light gas engine in front and a heavy battery pack in the back. Quote Link to comment Share on other sites More sharing options...
ptjones Posted December 20, 2014 Report Share Posted December 20, 2014 Ford cars in general tend to have overly soft suspensions in front and insufficient wheel travel in back, and it has ever been thus. In the C-Max, it's the soft front that bugs--you really have to slow down for dips. Progressive springs and/or progressive shocks that really stiffen up as they approach full compression might help. Apparently Koni FSD shocks--the not-so-poor man's alternative to active suspension--are available for the C-Max in Europe. I'd love to try those, but they're probably tuned for different weight distribution--i.e. a heavy turbodiesel lump in the front and nothing much in back, instead of a relatively light gas engine in front and a heavy battery pack in the back.I'm not sure that our front end is that light with Electric Motor/Generator in the front too. :) Paul Quote Link to comment Share on other sites More sharing options...
HotPotato Posted December 28, 2014 Report Share Posted December 28, 2014 I'm not sure that our front end is that light with Electric Motor/Generator in the front too. :) Paul Good point! Quote Link to comment Share on other sites More sharing options...
Mixxer Posted April 26, 2021 Report Share Posted April 26, 2021 (edited) Sorry to bring this thread back from the dead but if you guys are still active and are still curious, yes you can use focus suspension. Here’s my 2014 with Godspeed coilovers for a focus of equivalent year. Wheels are Konig ampliform. The rear springs are adjusted as high as they go unfortunately due to the low spring rate. I’m currently talking with Godspeed to see if they offer a stiffer spring for the rear so I can raise it up in winter. Edited April 26, 2021 by Mixxer jmcgliss, djc, ECO-AKJ and 2 others 5 Quote Link to comment Share on other sites More sharing options...
djc Posted May 5, 2021 Report Share Posted May 5, 2021 I don't understand how a low spring rate would limit raising the car using a spring coilover and shock spacer. A 25mm coilover will raise the rear 25mm. Quote Link to comment Share on other sites More sharing options...
jkaminsky Posted July 29, 2021 Report Share Posted July 29, 2021 I just put godspeeds on my 2013, stock wheels/tires. Naturally the front sits exactly like your car, and the rear is a bit too low. I'm told that I have 4" of threading left in the rear, but they didn't want to raise the car any higher for fear of it not being safe for the tubing (like it'd collapse or something). Next week I'm taking it to a performance shop for an alignment, they will probably sort that out for me. Quote Link to comment Share on other sites More sharing options...
jkaminsky Posted October 11, 2021 Report Share Posted October 11, 2021 And officially the spring rates are too frigging high. My car handles great in the corners, but anything but a glass smooth ride turns my kidneys to hamburger meat. Eibach produces all kinds of spring that will fit, but I need to find the stock spring rate and decide where in the middle I want to meet. I'm considering 15% stiffer than stock, once I locate those figures. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.