elargento Posted March 17, 2023 Report Share Posted March 17, 2023 (edited) I have a 2014 Hybrid SEL with the same problem. The wipers just start with a LOT of water. Thanks for all the comments. I learned a lot. Note: I found this video on how someone fixed the sensor by cleaning it. Edited March 17, 2023 by elargento Add material that could helps. Quote Link to comment Share on other sites More sharing options...
David McC Posted March 18, 2023 Report Share Posted March 18, 2023 You can also take off the sensor cover and unplug the sensor. After it is unplugged you have multi speed intermittent wipers controlled by the rotary dial on the stalk. Quote Link to comment Share on other sites More sharing options...
adam1991 Posted March 19, 2023 Report Share Posted March 19, 2023 On 3/17/2023 at 11:52 PM, David McC said: You can also take off the sensor cover and unplug the sensor. After it is unplugged you have multi speed intermittent wipers controlled by the rotary dial on the stalk. as noted earlier, there's no need for that. Just set the function in your information display. Set it to "intermittent" instead of "rain sensing". Quote Link to comment Share on other sites More sharing options...
cr08 Posted March 19, 2023 Report Share Posted March 19, 2023 On 3/18/2023 at 9:46 PM, adam1991 said: as noted earlier, there's no need for that. Just set the function in your information display. Set it to "intermittent" instead of "rain sensing". Doesn't exist in earlier model years. Many of those toggles in the IPC don't exist nor can they be enabled. I've tried to add a bunch of these on my 2013 and even when enabled they do not appear. The BCM is too old and not capable of surfacing these toggles. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.