Bill-N Posted September 19, 2015 Report Share Posted September 19, 2015 Of interest to those who use DTC (Diagnostic Trouble Code) readers, this was on OASIS today: 2013-2016 Fusion Hybrid/MKZ Hybrid/C-Max Hybrid - Disregard U3000:04 In The Battery Energy Control Module (BECM) Some 2013-2016 Fusion Hybrid/MKZ Hybrid/CMAX Hybrid vehicles may exhibit a U3000:04 DTC in the Battery Energy Control Module (BECM) that clears, but may return after a short time. This code is a commonly set DTC in the BECM and can be disregarded. Diagnose all other DTCs first. If no other DTCs are present no further action or repair is necessary. As stated in the Workshop Manual, Section 414-03, this DTC does not affect system operation and does not illuminate a warning indicator. Quote Link to comment Share on other sites More sharing options...
jdbob Posted September 19, 2015 Report Share Posted September 19, 2015 Sounds like they are just pointing out something that was already in the service manual. From the 5/17/2013 revision: "Diagnose all other DTCs first. If no other DTC is present no further action is necessary. This DTC does not affect system operation and will not illuminate a MIL." Quote Link to comment Share on other sites More sharing options...
jdbob Posted May 1, 2016 Report Share Posted May 1, 2016 That DTC just showed up on my 2013, never seen it before. Last week I had the RCM replaced under recall. The other recall was to re-program the PCM but the SOBDM-C, SOBDM-A, BECM, ABS, and DCDC modules were also-reprogrammed. Don't know if that had anything to do with it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.