Bill-N Posted November 16, 2015 Report Share Posted November 16, 2015 Posted 11/10/15 on OASIS. Presumably this relates to CSP 14B07. TSB 15-0174 HF-35 TRANSMISSION FLUID LEAK AT DAMPER HOUSING TO TRANSMISSION CASE JOINT - RTV SEALANT FAILURE - BUILT ON OR BEFORE 12/1/2013 Publication Date: November 10, 2015 FORD: 2013 C-MAX 2013-2014 Fusion LINCOLN: 2013-2014 MKZ This article supersedes TSB 14-0085 to update the Service Procedure, Part List and Service Labor Time Standards. ISSUE:Some 2013 C-Max, 2013-2014 Fusion, MKZ Hybrid and Energi vehicles equipped with a HF-35 automatic transmission and built on or before 12/1/2013 may exhibit a transmission fluid leak at the damper housing to transmission case joint. This condition may be due to an adherence failure of the RTV. ACTION:Follow the Service Procedure steps to correct the condition. SERVICE PROCEDURE Remove the transmission from the vehicle and separate the damper housing from the transmission case. Refer to the Workshop Manual (WSM), Section 307-01.Use Motorcraft® Silicone Gasket Remover to remove old RTV from the housing and case mating surfaces. Allow to dry.Use Motorcraft® Metal Surface Prep Wipes to clean and etch the mating surfaces. Allow to dry.Apply a bead of Motorcraft® Ultra Silicone Sealant and reassemble the transmission. Refer to WSM, Section 307-01.Install the transmission. Refer to WSM, Section 307-01. Quote Link to comment Share on other sites More sharing options...
10UHCSEL Posted November 16, 2015 Report Share Posted November 16, 2015 How does one determine if you have HF 35 tranny in their Cmax?? Quote Link to comment Share on other sites More sharing options...
Bill-N Posted November 16, 2015 Author Report Share Posted November 16, 2015 How does one determine if you have HF 35 tranny in their Cmax?? That is the C-Max transmission; there is no other. ptjones 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.