ptjones Posted August 1, 2018 Report Share Posted August 1, 2018 (edited) At 206k miles I'm finally doing a repair which I have to pay for, can't complain but FORD wants $600 to replace right hand half shaft axle which I can't afford with having to replace my tires in a month or two for $800. Fortunately I have a Son in Law that's good with working on cars if I need help. :) As it turns out I needed help separating ball joint from wheel knuckle and the extra pair of hands made the difference. My inner boot was leaking grease. Have pics of ball joint and wheel knuckle and old & new right hand half shaft.The rest of the steps were pretty easy, I'm getting new half shaft from AutoZone this afternoon for $145 vs $245 from FORD. will Post when I get the car back together. I have it most of the way back together, same problem area getting it back together. Definitely a 2 man job. :) Paul Edited August 1, 2018 by ptjones db22, JAZ and obob 1 2 Quote Link to comment Share on other sites More sharing options...
cmax-nynj Posted August 2, 2018 Report Share Posted August 2, 2018 (edited) Sometimes aftermarket driveshafts are prone to vibration; and you can see the difference of the shaft diameter in the photo. I'd prefer having a shop to rebuild the boots and re-use the OEM axles. Let us know how it turns out. Edited August 2, 2018 by cmax-nynj Quote Link to comment Share on other sites More sharing options...
ptjones Posted August 2, 2018 Author Report Share Posted August 2, 2018 Sometimes aftermarket driveshafts are prone to vibration; and you can see the difference of the shaft diameter in the photo. I'd prefer having a shop to rebuild the boots and re-use the OEM axles. Let us know how it turns out.We will see and I think if I had to do it over with I would gotten rebuilt mine or exchange for FORD one. I would want CV joints replaced though. I will drive it tomorrow to see if everything is OK. With two people doing this it isn't to bad. I saved $450. :) Paul Quote Link to comment Share on other sites More sharing options...
cmax-nynj Posted August 3, 2018 Report Share Posted August 3, 2018 Did fluid come out when you pulled the axle? Quote Link to comment Share on other sites More sharing options...
ptjones Posted August 3, 2018 Author Report Share Posted August 3, 2018 Did fluid come out when you pulled the axle?No it didn't. :) This was an easy job to do except for getting the ball end shaft out and back in the wheel knuckle. Paul Quote Link to comment Share on other sites More sharing options...
obob Posted August 3, 2018 Report Share Posted August 3, 2018 (edited) I am trying to visualize the problem. So did you replace it because it was leaking grease or was there some other problem ? Was it because the inner boot broke or is the grease usually contained in a bearing whose seals are failing ? Any thoughts on why it failed. Road debris assault, weakness in manufacture, not put back right when trans replaced or just a lot of miles ? Thanks. I am very impressed you were able to do that. Edited August 3, 2018 by obob Quote Link to comment Share on other sites More sharing options...
ptjones Posted August 3, 2018 Author Report Share Posted August 3, 2018 I am trying to visualize the problem. So did you replace it because it was leaking grease or was there some other problem ? Was it because the inner boot broke or is the grease usually contained in a bearing whose seals are failing ? Any thoughts on why it failed. Road debris assault, weakness in manufacture, not put back right when trans replaced or just a lot of miles ? Thanks. I am very impressed you were able to do that.From what I can see it just cracked along the seem maybe a 1/4 to 1/3 the way around where the grease was coming out. Keep in mind that it has 206k miles and 108k since trans replacement so I'm thinking alot of miles. The only thing I noticed was a slight vibration like ICE missing in acceleration. I replaced the plugs for the first time :) , I think they were fine and didn't make much of a difference. The problem felt like it was in the right front drive train. I needed to rotate my tires and notice grease inside my right front wheel so I knew something wasn't right. Checked wheel bearing but no grease, but there was grease on inside of half axle. The other half shaft looks fine so far. Paul obob 1 Quote Link to comment Share on other sites More sharing options...
cmax-nynj Posted August 3, 2018 Report Share Posted August 3, 2018 (edited) Just found out that Rockauto has the Motorcraft rebuilt axle (Right) for $145 + shipping. I do have a competent local mechanic who can pull and install an axle within 45 mins(given there are no seized/ruste parts) just in case Edited August 3, 2018 by cmax-nynj obob, ptjones and db22 1 2 Quote Link to comment Share on other sites More sharing options...
ptjones Posted August 4, 2018 Author Report Share Posted August 4, 2018 Well I've put about 120 miles on replacement half shaft mostly FWY and it seems to be running smoothly, no vibrations. :) Paul obob 1 Quote Link to comment Share on other sites More sharing options...
jestevens Posted August 6, 2018 Report Share Posted August 6, 2018 That's awesome Paul, I'm glad you were able to get so many miles out of your car.. ptjones 1 Quote Link to comment Share on other sites More sharing options...
ptjones Posted August 6, 2018 Author Report Share Posted August 6, 2018 And I'm still getting best MPG's that I have ever gotten. With 409 mi. on this tank and 410 mi. to Empty, currently 58.9 mpg with 50% HWY. :) Paul db22 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.