Leaderboard

i can now confirm those other blocks make a major difference as after just changing on my 2020 FFE to the identical blocks of ALL of the TCU blocks as shared from that was done by a Ford dealer I now have ability to set “Preferred Charge Times” (formerly called “Value Charge in MFM and still in SYNC). So every bit matters ? Charge level notification is yet to work, but the banner now at the bottom seems sufficient. Note after making these changes to the TCU, I reset the TCU & and the APIM. Then I did a SYNC reset. So now all good so far on my FFE as long as the 12V battery issue doesn’t come up again.

I have this enabled on my 2014 C-MAX. I only have rear parking sensors. It required changes to as-built data in two places in the APIM (first change enables the overhead view of the little car onscreen, the second shows the graphical rear sensor levels when in reverse): 7D0-01-01 xBxx xxxx xxxx - changed 2nd digit to "B" 7D0-02-02 x3xx xxxx xxxx - changed 2nd digit to "3" My wife has the car with her until mid next week or I would take a photo.

It would be super cool to get that overlay if we can. I have a 2017 C-Max Energi Titanium (so it has the auto park, blis and rear cross traffic alerts). PAM - Parking Aid Module: Part number: CJ5T-15K866-BH Calibration level: CJ5T-15K866-BH Strategy: CJ5T-14C090-BH Calibration: CJ5T-14C091-BJ I also do not show an option to edit the asbuilt for the PAM module. The only option that shows up for it is firmware upgrade.

For me the Android app has been inconsistent, or even regressing. I have a 2017 C-Max Energi Titanium with Sync 3 (v3.0.20204); some of what I observe may be due to the car that I have and its equipment. Unlike several others who post on this forum, I have not upgraded to Sync 3.4 via Cyanlabs. That probably plays into this as well. Here is how the app is currently working or not working for me: Home screen: Remote unlock, remote start, and remote lock all appear to work. There is a "My News" box with a "Find a dealer" button. For a while, a charging banner would appear when the car was charging, but I haven't seen that for a while. When charging is complete, messages are appearing in the message center in the account menu from the home screen. Vehicle screen: shows time since last updated, location, odometer, battery gauge, fuel gauge, vehicle status button, and scheduled start button. Vehicle screen, status submenu: shows tire pressure warning button and oil life button. These appear to be working. Vehicle screen, charging submenu: Some time ago, I was able to set value charging at home through charge setting button, but now that capability doesn't appear; only "Departure Times" appears. It reports my current departure times and has a button to add more. However, I only charge at home these days, which might be affecting what this submenu offers. The current state of the charging menu appears to generate the most current discussion in this topic. Vehicle screen, driving data submenu: Journeys button is present. However, I do not record journeys as I did not find the information helpful when I did. Service screen: I have not used this up to now. I just enabled vehicle health reports to be sent to me; I will have to see what comes from that. Map screen: shows the correct location of the car and my smartphone. I haven't used the other features here (fuel, charging, etc.). Hope this helps.

I just did the install today. Got a TCU from flvpmods, the official ford antennae the F150 guys are using, and a bingfu cable. Removal was pretty straightforward, thanks to the docs you all posted. I also had to "rock" the big side panel back and forth. Also broke the connector the light that was on that panel, so disconnect that first! I thought I was safe but when the panel finally gave, it broke from the tension on the cable. I also took the advice and used one of the battery cover bolts and drilled out the antennae before mounting it there. As a total novice, it took 2 hours with all the guides you've posted. Thanks! So far, on the android Fordpass app, it can see where my car is located, but nothing else is working yet. Lock unlock almost worked once, but the a door was ajar. The app told me which door it was, so clearly it is communicating with the car. Looking forward to seeing what functionality pops up in the app! Thanks for all the help so far!