Madmax98

Those 2835 Reverse LED's do look like they fill out the housing better, curious if throw they light up more of the ground with the sideways orientation. Got any pix of the new red brake/tail lights?

The xenondepot option shows a CANBUS option for an additional $17. I certainly hope not to need resistors or canbus for use between park/brake light and based on your pricing mentioned @notquitesane, it looks like you didn't get canbus option. http://www.xenondepot.com/7443-LED-Philips-12835B2-Bulb-p/12835b2.htm Here's another Phillips 7443 option on ebay. Vendor says the Phillips red are only 50 lumens (which is subjective according to some - so I assume vendor means that this is Lumen rating PER led, so this should be 8x50=400). I'm considering purchasing to compare with white CK led option I am waiting on which another vendor claims to be 1400 lumen as brake, and about 700 as tail. I have to think that 3x in white will still be brighter, even if a little pinker, I'd rather go for BRIGHTer, otherwise not much point just for speed and load.... a white ck 7443 option (still waiting to receive) http://www.ebay.com/itm/331236855437?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT here is another Phillips 7443 red led option http://www.ebay.com/itm/161714122908?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

I'd argue that replacing the 12V battery (especially a 2.5 year old battery that passes some charging tests) is not necessarily a long term solution, if in fact there is some parasitic drain which could eventually kill the replacement battery prematurely (i.e. <3 yrs).

Thanks, found it - 300A but also has Daytime Running Lights option....

No worries, it wasn't just you, I've got another seller saying their Phillips chart saying their 7443 should work too and not labeled as CK. As long as ebay sellers are kind/trusting enough to refund me, it's just waiting for next order to come, some return shipping costs. I am surprised that the Phillips work, I wonder if any different from 2013 socket. Got a link for where you sourced your Philips Xtreme Vision? I found one seller with Red version, but I'm still not convinced Red ends up being brighter, even if color 'purer'. http://www.ebay.com/itm/161714122908?item=161714122908&viewitem=&sspagename=ADME:X:RTQ:MOTORS:1123&vxp=mtr

I'm not sure where I read/saw that the Ford socket is 'Standard', but upon closer inspection, ground contacts are across the same side of the socket, making this a 'CK' type socket after all according to many of the drawings out there at bulb vendor sites. Not sure I can convert this bulb by bending pins around, or if I can find a CK style LED bulb replacement....will update later.

Click on image to read the label is a W21/5W dual filament bulb I'm tring to replace. Notice the inside pins light up the top filament which is the dimmer (park/tail) filament. The outside pins light up the lower filament which is the brighter brake light.

http://www.ebay.com/itm/281663277363?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT failed and http://www.ebay.com/itm/2x-7443-7440-High-Power-CREE-30W-White-Reverse-Brake-Tail-Turn-LED-Light-Bulbs-/251882852345?hash=item3aa5634ff9&vxp=mtr also failed Pins match the incandescent dual filament W21/5W, but perhaps internal wiring to the LED's is screwy? How hard can it be?

I am having a bear of a time finding a 7443 bulb that actually works, have gone through two failed attempts. The ones I have tried so far work EITHER as a brake only light, or if turn 180 degrees, then work ONLY as a park/tail light. I don't get how these dual filaments get tested or why they don't work in same way as dual filament incandescent. Interior contacts are for park light, exterior contacts for brighter brake, 2 different brightnesses... Also don't get how vendors test these and why doesn't work in my car. Any recommendations?

I had pretty good luck with the side mirrors, tilting them up and in all the way and using a mini-crow bar to gently push the center area outwards away from mirror holder. pushing out on that one spot popped the whole mirror off pretty cleanly. and yeah, I hear ya, the white led batch I got is nice led quality, but not killer bright lumens since is same ones used for license plate and trunk area....

Thanks for reply Rebecca. This was first time I tried. Curiously, I just got my Energi to finally read me a new text message. Only seems to be able to read the brand new messages received WHILE connected to sync. It's a start..... ;)

sync responds to 'Listen to Messages' command with 'Message 1 : " .......", so she knows there's a message to be read, she announces that she's about to read the message, but she can't seem do the text to speech of the actual message content , so she says nothing....

Having odd issue, trying to avoid master reset 2013 Energi s/w 4.3.13171 - allegedly latest up to date software. I do have sirius trial account - not sure if issue there. Apple iphone6 ios 8.3 up to date. blue tooth notifications on, Unread text message showing on my phone. When I send sync command 'Listen to Text Messages' it will say 'Message 1',but then it will not read any of the message. Message is 1 word "Regular". tried unpairing, repairing tried key cycling tried reset phone tried restart phone called ford help and all they gave me so far was - try master reset. I really don't want to go through the 24 hour connection headache for myford mobile which they say I will lose with master reset. Anybody got any success / similar story and resolution ? Thanks!

How can we tell if I have 300a v. 301a, etc? Please add those instructions to the poll itself , thanks.