joc Posted December 11, 2014 Report Share Posted December 11, 2014 (edited) Ford press release...https://media.ford.com/content/fordmedia/fna/us/en/news/2014/12/11/ford-sync-3-delivers-new--innovative-ways-for-people-to-connect.html from Automotive News...http://www.autonews.com/article/20141211/OEM06/141219981/ford-dumps-myford-touch-name-in-revamp-of-infotainment-system "...Vehicles equipped with MyFord Touch will not be able to upgrade to Sync 3." :sad: Edited December 11, 2014 by joc Quote Link to comment Share on other sites More sharing options...
fotomoto Posted December 11, 2014 Report Share Posted December 11, 2014 (edited) "...Vehicles equipped with MyFord Touch will not be able to upgrade to Sync 3." I suspect this is the reason why, "The new system, which Ford calls “Sync 3,” uses BlackBerry's in-car operating system, QNX, instead of the Microsoft technology that has underpinned Sync since its introduction in 2007. " Edited December 11, 2014 by fotomoto Quote Link to comment Share on other sites More sharing options...
jdbob Posted December 12, 2014 Report Share Posted December 12, 2014 The hardware is very different too. Then changed from the cheap resistive touch screen to a capacitive touch screen like those on tablets. The processor is also possible of higher speed, the one in MyFord Touch maxes out at 600MHz while the new one can go to 1700MHz. Quote Link to comment Share on other sites More sharing options...
ArizonaEnergi Posted December 12, 2014 Report Share Posted December 12, 2014 PC Mag article on it: http://www.pcmag.com/article2/0,2817,2473485,00.asp Quote Link to comment Share on other sites More sharing options...
drdiesel1 Posted December 12, 2014 Report Share Posted December 12, 2014 Looks like a windows 8.1 design to me ;) Quote Link to comment Share on other sites More sharing options...
jdbob Posted December 13, 2014 Report Share Posted December 13, 2014 It's theoretically possible that a company could make a replacement APIM (that's the computer and 8 inch touchscreen) for existing cars, but it's hard for me to imagine how they would make money. It's not just the touchscreen and controller, that's pretty generic hardware at this point. There would be reverse engineering of the extensive communications between it and others portions of the car. In case anyone is interested, here's what the back of the touchscreen computer module looks like. One large connector that connects to stuff all over the car and a small cable for USB that goes to the hub inside the center console. ptjones and joc 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.