SPL Tech Posted January 19, 2015 Report Share Posted January 19, 2015 As with all CMAXes, my window buttons are dual stage. I press all the way down and the window goes down automatically. I press half-way down and I have manual control. But when I roll the windows up, the second stage does not seem to function. I cannot get the windows to roll up automatically. I can feel the second "click" on the button, so the buttons are dual stage for both down and up, but it seems the second stage has been disabled. Any ideas? Quote Link to comment Share on other sites More sharing options...
drdiesel1 Posted January 19, 2015 Report Share Posted January 19, 2015 You need to program them. Roll the window down, then hold the switch in the full up position.When the window reaches the top, continue to hold the switch for 3 to 5 seconds after it's closed.This will set the limiter control and activate the auto up function. Do this for all windows that aren'tauto closing. 62Lincoln, ScubaDadMiami, MichaelM and 3 others 1 5 Quote Link to comment Share on other sites More sharing options...
Recumpence Posted February 12, 2015 Report Share Posted February 12, 2015 Do you live in a very cold climate? In super cold weather my auto up will cease working on the front two windows. Once the weather goes above 20 degrees, they start working again. Not sure why. Maybe you are encountering a similar thing? Matt Quote Link to comment Share on other sites More sharing options...
Bill-N Posted February 12, 2015 Report Share Posted February 12, 2015 (edited) I just had a Fusion rental for a month and had a problem with front windows not going down. Come to find out the glass was frozen to the outside weather stripping. I ran a credit card along the bottom outside edge, between the glass and the door, and then the windows worked correctly. Edited February 12, 2015 by Bill-N Quote Link to comment Share on other sites More sharing options...
mtthwgibbons Posted March 9, 2015 Report Share Posted March 9, 2015 I just had the same problem. the answer drdiesel1 posted worked! Quote Link to comment Share on other sites More sharing options...
SnowStorm Posted October 5, 2019 Report Share Posted October 5, 2019 After my recent dead battery the front window's One-Touch Down/Up and Bounce-Back functions were messed up. Driver's window would reverse when fully closed. After searching posts and considerable "retraining" I finally got them working again. Probably not a good idea to have windows open if you're going to have a dead battery! Quote Link to comment Share on other sites More sharing options...
jestevens Posted October 7, 2019 Report Share Posted October 7, 2019 I thought this was going to be a post on the "global express" down function of the FOB where when you hold down the unlock button all the windows unwind. But yeah, any time you reconnect the 12V you need to "re-calibrate" the windows.. Quote Link to comment Share on other sites More sharing options...
62Lincoln Posted September 23, 2020 Report Share Posted September 23, 2020 On 1/19/2015 at 12:45 AM, drdiesel1 said: You need to program them. Roll the window down, then hold the switch in the full up position. When the window reaches the top, continue to hold the switch for 3 to 5 seconds after it's closed. This will set the limiter control and activate the auto up function. Do this for all windows that aren't auto closing. Awesome instructions that still work in 2020 on my 2013 C-Max Energi! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.