MtnMarty

Update: Many is still at the dealer. They've replaced the tranny and also said there was a leak in the transmission cooling system that may have caused the tranny to die. Seems strange to me as i did not note any fluid on the ground at all. Also they found a bad wheel bearing. The tranny is covered under warrantee and also I believe the cooling system, not the bearing I presume. I'm beginning to think it may be time to unload this car. Sad.

My 2013 SEL is in the shop for it's second transmission replacement. first one came at about 83000 miles and this one is at 89000 miles. Gives me an uncomfortable feeling about keeping this car which i otherwise love. So far, I've spent nothing for the repairs.

I recently had my 2013 SEL transmission replaced completly by my dealer. No questions asked and I paid nothing. Took a bit over a week and I had a new Focus loaner for that time from the dealer...also free. My car had 79,000 miles on it as well.

I’m definitely inclined to keep my Maxy. However I’m now sitting at the dealer again as there’s leakage of fluid from the transmission. UPDATE: they just informed me that it was a cracked gasket where the line enters the trans. Replaced it and I’m soon good to go.

Thanks for your reply Bob. Yes, I've read some of the tranny problems on this forum. I do about 20-30% long trips. We drive from western NC to NJ several times per year at interstate speeds and also several other trips as well. For example we're doing a Florida run next month. But most of the time it's just around town kind of driving. Asheville is hilly, so there's that to consider as well. All things being equal, I'd really like to keep the car as I do like it a lot. PS--lI don't want the trans to fail again!

I have a 2013 Cmax SEL with 79,000 miles. I just got my car back from my dealer after a brand new transmission was installed for free...thank you Ford. I had the whining sound when driving and they said it was a bad internal bearing and replaced the entire transmission. So, I’m wondering if this is a message to me that I’m faced with other major repairs? The car drives really well now and I like it quite a bit. I get in the 40’s to 50 around town and about 40 on the highway at 70 mph speeds. So the question is what’s the sweet spot between sale value now and future repair costs. Opinions? Marty

So I bought new tires the other day. Here's the details: I've got a 2013 with 59,000 miles. Liked the first set of Michelin's and wanted to get the same ones. I only needed 3 because I had to replace one while traveling when I tore the sidewall out of one. The replacement tire has 8/32 left, so I got 3 of the same as original (Michelin A/S). So, here's my questions: I have the older tire on the right front. What do you-all think of that decision? Now as to tire pressure: I filled them to 38. My tire guy did not want me to go higher due to wear life. I've read threads here in which folks are riding on really high pressure, like even 50. I'm wondering about hemorrhoids at that high a pressure, not to mention tread life. BTW, I was able to get the tires from a local independent shop for $207 each including tax, balancing, etc. What say you-all? Marty

Restart the phone.

My apologies all. Today I was able to enable Siri via bluetooth with an extremely long paddle pull. It does work Kellytunes.

Well, MFT works fine on BT for me and my iPhone 6. But I must be connected to power, either by usb or using power cord for Siri to be voice activated by the looonnng pull on the paddle. So, don't know what's going on.

Well not on my iPhone 6 using latest software.

But: Are you guys using it via bluetooth or must you be plugged in to usb????? I can use Siri only while plugged into usb.

Thanks for this update. I've read about some new update to allow bluetooth communication with Siri, but have been unable to find it. Wondering if this will require an update to Ford synch 308 or to iOS 9 or perhaps both??

Glad you mentioned this Scott. I was about to post something also. Since doing the 3.8 update, I've wondered why I couldn't invoke Siri Eyes unless I was plugged in. What a shame. Should work by bluetooth. Maybe Car Play would work via Bluetooth though. Marty

As far as I know, it's mainly for Siri eyes for the iPhone.

Thanks so much Kellytunes for the hint about holding the paddle down longer. It seems to need about 2 full seconds to activate Siri. Now it works

I've tried to load large images and it does not let me load them...error message.

Update: Successfully installed the update and I'm now at 3.8. BUT, I don't know if this was even worth it. It seems that in order to use Siri Eyes, you must have Sync 3. I don't think I have this and I'm really confused about trying to determine which system I have. I have a 2013 SEL w/o the navigation system. About to reinstall my wallpapers and try to determine what I can do with this great 3.8 system.

THe image size is important as you want the pic to completly fill the screen.

i downloaded the update from the Ford Owner site yesterday. The directions spoke about unzipping the file, but I believe it downloaded unzipped already. When I looked into the file structure, there seemed to be several zip files and it was unlcear to me which one to unzip. So I discarded that one and re-downloaded the file. I placed that on my flash drive and will try to install it later today when I have time. Pray for me.

Can someone point me to a download link for the MFT 3.8 file? Just returned from the dealer having the big 2 recalls done and he doesn't have the 308 file for me.

Can't access file because I don't have a Ford Fusion sign in.

I also sent a PM. What i don't know is whether my 2013 is included or not. I do think it's great that Ford and other companies are using social media to communicate with us customers.

Well, I may have solved my own problem. I did a hard reset of my iPhone and repaired and now it seems to be working. Time to cancel the appt at the dealer.

Using an iPhone with synch and have successfully for years. All of a sudden, hands free won't work. The phone is paired properly (and I repaired it also). I can use voice to ask for a number, and it dials the number, but no sound from the phone comes into the system. Voice says it is dialing the number, but I there is no sound coming through. Also, there is now a menu which pops up on the right small screen giving a choice to connect to hands free. Using the toggles can select that option, but once highlighted, nothing else happens. I also used voice command to connect hands free. I get a confirmation by voice but nothing happens. I just did a master reset of synch and after booting up again, the same problem occurs. Hoping someone has an idea for me.